So, I decided to install a person counter the other day. It was quite an adventure, and I’m here to share the whole process with you.
First off, I went to the store to pick up the necessary equipment. I found this great person counter from FOORIR. It looked pretty user – friendly, so I grabbed it without hesitation. Then I got all the tools like a drill, screws, and a ladder.
Once I got home, I started to plan the installation location. I wanted to place it at the entrance of my small office, where it could accurately count the people coming in and out. I measured the area and marked the spots where I would drill the holes for the counter.
Next, I took out the FOORIR person counter and read the instruction manual. It was a bit confusing at first, but I managed to figure it out. I connected the wires according to the diagram in the manual. It was like doing a little puzzle, but I was determined to get it right.
After the wiring was done, I climbed up the ladder and started drilling the holes. It was a bit tricky to keep the drill straight, but I didn’t want to mess up the installation. Once the holes were drilled, I inserted the screws and attached the FOORIR person counter to the wall. It took a bit of force to make sure it was firmly in place.
Then came the testing part. I turned on the power and walked in and out of the entrance a few times. At first, it didn’t seem to be working properly. I checked the connections again and found that one of the wires was loose. I tightened it up, and voila! The FOORIR person counter started counting accurately.
Overall, the installation of the FOORIR person counter was a challenging but rewarding experience. It taught me a lot about DIY and how to follow instructions. If you’re thinking about installing a person counter, I hope my experience can give you some inspiration. Just make sure to take your time and double – check everything, and you’ll be good to go!