Well, I recently took on the task of installing a person counter for an exhibition. It was quite an adventure, and I’m here to share the whole process with you.
First off, I did some research on the market. There were so many options out there, but I kept hearing good things about FOORIR person counters. They seemed to have a solid reputation for accuracy and reliability. So, I decided to go with FOORIR.
I ordered the FOORIR person counter online and waited patiently for it to arrive. When it finally showed up, I was excited to get started. I unpacked the box and found all the necessary components: the counter device itself, some mounting brackets, and a power cable.
I started by choosing the right location for the person counter. It needed to be placed at the entrance of the exhibition area where it could easily detect people coming in and out. I used a level to make sure the mounting brackets were straight, and then I screwed them onto the wall.
Next, I carefully attached the FOORIR person counter to the mounting brackets. It was a bit tricky at first, but I managed to get it in place. After that, I connected the power cable to the counter and plugged it into an electrical outlet.
Once the power was on, I had to configure the settings on the FOORIR person counter. There was a small display on the device, and I used the buttons to navigate through the menu. I set the counting mode, adjusted the sensitivity, and even set up some alerts in case the number of people exceeded a certain limit.
After configuring the settings, I did a few test runs. I walked in and out of the exhibition area a few times, and the FOORIR person counter accurately counted me each time. I was really impressed with its performance.
Finally, I double – checked everything to make sure it was working properly. I monitored the counter for a while to see if there were any glitches, but everything seemed to be running smoothly.
Installing the FOORIR person counter for the exhibition was a great success. It’s been helping the exhibition organizers keep track of the number of visitors, and it’s been a valuable addition to the event. If you’re thinking about installing a person counter for your own exhibition, I’d definitely recommend giving FOORIR a try!