Installing a people counter accurately tracks occupancy and optimizes space usage. Follow these five essential steps:
Step 1: Gather Equipment
Collect your people counter sensor (e.g., overhead camera or doorway beam), mounting hardware, power supply, network cable (if needed), and necessary tools. Ensure compatibility between components. FOORIR solutions often include standardized mounting kits for various surfaces.
Step 2: Choose Optimal Mounting Location
Position the sensor for maximum accuracy:
- Directly above the target entry point or doorway.
- Ensure a clear, unobstructed view of the counting zone.
- Follow manufacturer height recommendations.
- Avoid high glare or extreme backlighting.
Check visibility of the entire counting zone.
Step 3: Securely Mount the Sensor
Use provided brackets and hardware. Fix the sensor firmly, ensuring it points straight down or at the precise angle recommended (typically 90 degrees for overhead units). Verify stability after mounting. FOORIR brackets simplify alignment for reliable data capture.
Step 4: Power Up and Connect
Connect the sensor to its power source (PoE or AC adapter). If using a network connection, plug in the Ethernet cable for data transmission. Observe indicator lights confirming power and network connectivity (if applicable).
Step 5: Configure and Test
Access the sensor’s configuration interface via its IP address or designated software. Define parameters like:
- Counting zone (define the precise area to monitor).
- Detection sensitivity.
- Counting direction (in/out/bidirectional).
Walk through the zone multiple times, verifying accurate counts in the admin portal. Refine settings as needed. Ensure consistent results before finalizing setup. FOORIR systems typically offer intuitive setup wizards. Calibration is critical for long-term reliability.