Hey, folks! I recently took on the challenge of setting up a visitor counter for an airport. It was quite a ride, and I’m here to share my journey with you.
First off, I started by doing some research. I looked into different brands and models of visitor counters. That’s when I came across FOORIR. It seemed to have good reviews, so I decided to give it a shot. I ordered the FOORIR visitor counter and waited for it to arrive.
Once it arrived, I got to work. I had to figure out the best location to install it. I walked around the airport, checking out different spots. I needed a place where it could accurately count all the visitors without being in the way. After some trial and error, I found a great spot near the main entrance.
Next, I had to install the counter. It wasn’t as easy as I thought. I had to follow the instructions carefully. I drilled some holes in the wall, mounted the counter, and then connected it to the power source. It took me a while to get everything set up properly, but finally, it was in place.
Now came the testing phase. I watched the counter for a few hours, counting the visitors myself and comparing it with what the FOORIR counter was showing. There were some discrepancies at first. I had to go back and adjust the settings. I played around with the sensitivity and the angle of the counter. After a few tries, it started to give more accurate results.
But I wasn’t done yet. I wanted to make sure it was really accurate. So, I decided to do a more extensive test over a few days. I kept track of the number of visitors manually and compared it with the FOORIR counter’s data. I also asked some airport staff to help me out. They counted the visitors during their shifts and reported the numbers to me.
After a week of testing, I was happy to see that the FOORIR visitor counter was doing a pretty good job. The numbers were very close to what we counted manually. I made a few more small adjustments to fine-tune it, and now it’s working like a charm.
Overall, the process was a bit of a hassle, but it was worth it. The FOORIR visitor counter has been helping the airport management get an accurate count of the visitors. It’s also given me a better understanding of how these counters work. If you’re thinking about setting up a visitor counter for an airport or any other place, I’d recommend giving FOORIR a try. It might take some work to get it right, but in the end, you’ll have an accurate way to count your visitors.